SDI E-CLIK SUSPENSION FOR CAN-AM DEFENDER NOW AVAILABLE
SDI E-CLIK SUSPENSION FOR CAN-AM DEFENDER NOW AVAILABLE
From long days on the farm, to tight twistng trails, SDi E-CLIK’s electronic shock package for the Can-Am Defender makes it easy to dial in your suspension for the terrain you’re in or load you may have in the bed, taking your Defender to the next level.
E-CLIK System Features $3599.99
-
- Verified to Fit 19-22 Can-Am Defender HD10 Limited & Lonestar Models
- Three positions for easy on the fly adjustment
– Comfort – Perfect for cruising around, comfort gives less damping for a more comfortable ride.
– Sport – For when you need to kick it up a notch. Sport increases damping performance to give you a more composed ride at higher speeds while offroad.
– Heavy – When you’ve got a full cab and a full bed weighing things down, heavy will provide increased damping to deal with the increased load.
Cab mounted rocker switches allow for separate front and rear steering adjustment. The E-CLIK shock package also provides a lift to the Defender, letting it ride higher in the travel.
E-CLIK Active Pro System Features – $4999.99
- The E-CLIK ECU uses 12 inputs from multiple sensors, an industry leading 250 times per second to adjust each shock automatically based on terrain and driving conditions.
- Adjustments are made near instantly utilizing SDI’s patent pending E-Valve
3 Modes – Allow adjustment to the base shock seeing through the controller.
Trail – Excels in slower trail riding and rock crawling Giving a soft, comfortable ride without sacrificing body control.
Desert– For when you need to turn it up a notch, Desert Mode focuses on handling, by reaching faster to terrain and driver input, sensing rough whooped out terrain and adjusting at the precise time.
Street – Prioritizes composure, more damping at the right times for a composed ride and excellent feedback to the driver.
- More sensitive to driver inputs: braking, throtle, steering.
- The high accuracy, 8 Axis Inertia Measurement Unit is a advanced stand-alone unit, separate from the ECU circuit board.
- IP69K – E-CLIK utilizes rugged ECU, IMU, and sealed connectors to stand up to the harshest conditions.
- Independent Front and Rear Shock Adjustment
- Rear Load Compensation
- Real Time Displays-Shock setting at all 4 corners.
– Vehicle Roll and Pitch
– Vehicle Speed (corrected for tire size - Fine Tune Like a Pro – The PRO menu also allows adjustment to the way the system reacts to every driving condition. You’re able to Adjust:-Pitch Sensitivity
– Roll Sensitivity
– Turn Sensitivity
– Throtle Sensitivity o Brake Sensitivity
About the shocks:
- Our 2.5” Piggyback shocks feature a bump zone within the shock for increased compression damping at the end of the stroke. The shock was designed with durability and performance in mind.
- 7/8ths shafts
- Low Friction Seals and DU Piston Bushing
- High-quality Teflon lined bearings.
- The shocks come sprung and prevalved by SDI to offer the best performance
- The springs are made using H5S.TW and are produced by Swift in their own foundry in Japan, allowing unmatched quality control.
WEBSITE: www.suspensiondirect.com
Suspension Direct, Inc.
571-B Crane Street
Lake Elsinore, CA 92530
Comments are closed, but trackbacks and pingbacks are open.